Tagged: Upgrade

Initial Configuration for Embedded Wireless Controller

Product overview Official explanation The Cisco® Embedded Wireless Controller (EWC) on Catalyst® Access Points is a software-based controller integrated into Cisco Catalyst 9100 Access Points. It is a simplified, low-cost, feature-rich Wi-Fi architecture with...

Upgrade a Cisco Catalyst 9800 Series Wireless Controller

1. Delete old installation files install remove inactive 2. Copy files from ftp server to flash memory copy ftp://username:password@image flash: 3. Confirm copied file dir flash:*.bin 4. Install to bootflash install add file bootflash:image...

Using RTOS image to recovery WLC

If your WLC failed to load image, you may need to recovery the WLC using RTOS image. We need to contact TAC to get the RTOS image. The following are the upgrade steps. Type...

How to upgrade IOS AP from ROMMON

Press the ESC button during AP startup to enter ROMMON mode. Then use the following command to upgrade the IOS AP. The following is the upgrade process, I used an AIR-CAP3602I-A-K9. 1. Set the...