Using RTOS image to recovery WLC
If your WLC failed to load image, you may need to recovery the WLC using RTOS image. We need to contact TAC to get the RTOS image. The following are the upgrade steps. Type...
Tagged: image
The difference between K9 and K9C in the 1800/2800/3800 series
For the 1800/2800/3800 series, there are two models, one is K9 and the other is K9C. C in K9C means Configurabule. Usually, the K9C image at the factory is Mobility Express controller software, and...
How to recovery AP from u-boot mode (AP2800/AP3800)
The following is the recovery method when the AP stuck in u-boot mode. It should be noted that these methods have certain risks. 1. Change the bootcmd variable It is possible for the AP...
How to upgrade IOS AP from ROMMON
Press the ESC button during AP startup to enter ROMMON mode. Then use the following command to upgrade the IOS AP. The following is the upgrade process, I used an AIR-CAP3602I-A-K9. 1. Set the...
Recent Comments