Product overview Official explanation The Cisco® Embedded Wireless Controller (EWC) on Catalyst® Access Points is a software-based controller integrated into Cisco Catalyst 9100 Access Points. It is a simplified, low-cost, feature-rich Wi-Fi architecture with...
I am learning C9800 series wireless controller recently. For someone (me) who is familiar with AireOS, everything is new. I sorted out the steps – how to collect debug on C9800. First, we need...
If you are using Cisco Catalyst 9800 Series Wireless Controller, you may not be able to log in to the AP after AP Join and the following error message appears. Probably for security reasons,...
1. Configure AAA Add the ISE address to the 9800 WLC. Configure Server Groups (optional, not required). Configure AAA Method (required), If not configured, authentication will fail, which will be discussed in 6. Verification....
1. Configure WLAN Add WLAN in Configuration> Tags & Profiles> WLANs and configure PSK. Don’t forget to change Status to ENABLED. 2. Configure location Add location, you can also use the existing location. Configure...
1. Delete old installation files install remove inactive 2. Copy files from ftp server to flash memory copy ftp://username:password@image flash: 3. Confirm copied file dir flash:*.bin 4. Install to bootflash install add file bootflash:image...
The following is the initial configuration process of C9800-80-K9. 1. Configure IP address and default route Updated on November 5, 2020Or configure the IP address in the port instead of SVI 2. Configure SSH...
Updated on May 21, 2020: If you are looking for C9800 wireless controller automation, please refer to my following article, I hope this helps you.Monitoring IOS-XE device with Netconf API + Grafana + InfluxDB...
In the post “Logging into WLC GUI with Python” I showed how to use Python to log in to the WLC GUI. In this post we will go a step further and learn to...
Recent Comments