The installation environment is Ubuntu 19.10. Upgrade packages Install Ansible Verification ansible.cfg: This is the ansible configuration file.hosts: The hosts file includes the device information( IP address, etc.). Documentation Installing Ansible on Ubuntu https://docs.ansible.com/ansible/latest/installation_guide/intro_installation.html#installing-ansible-on-ubuntu
I often need to open multiple putty sessions. When I need to use it again after a while, sometimes putty has been automatically disconnected. This has troubled me for a long time, and now...
I installed new Ubuntu 19.10 server and realized that I need to use netplan to configure the network. The following is my configuration. Configure the IP address and DNS Configure proxy Save configuration We...
Notepad++ is often used in my work, mainly for analyzing logs. If I can mark some important content in advance, it will greatly improve my work efficiency. So I started the ax-udl project, which...
I am learning C9800 series wireless controller recently. For someone (me) who is familiar with AireOS, everything is new. I sorted out the steps – how to collect debug on C9800. First, we need...
If you are using Cisco Catalyst 9800 Series Wireless Controller, you may not be able to log in to the AP after AP Join and the following error message appears. Probably for security reasons,...
1. Configure AAA Add the ISE address to the 9800 WLC. Configure Server Groups (optional, not required). Configure AAA Method (required), If not configured, authentication will fail, which will be discussed in 6. Verification....
1. Configure WLAN Add WLAN in Configuration> Tags & Profiles> WLANs and configure PSK. Don’t forget to change Status to ENABLED. 2. Configure location Add location, you can also use the existing location. Configure...
EEM can be used for monitoring, or triggered by specified conditions (change configuration, etc.). The following is Cisco official document. Embedded Event Manager (EEM) is a distributed and customized approach to event detection and...
1. Enable IOx 2. Confirm IOx status We can see IOx service (IOxman): Not Ready. This may take a few minutes. 3. Configure port If the port is not configured correctly, the following error...
1. Delete old installation files install remove inactive 2. Copy files from ftp server to flash memory copy ftp://username:password@image flash: 3. Confirm copied file dir flash:*.bin 4. Install to bootflash install add file bootflash:image...
The following is the initial configuration process of C9800-80-K9. 1. Configure IP address and default route Updated on November 5, 2020Or configure the IP address in the port instead of SVI 2. Configure SSH...
Recent Comments