In this post I will demonstrate how to configure the internal DHCP server. Compared to external DHCP servers, the WLC’s internal DHCP server is simpler to configure and less expensive. The following three steps...
In this post, I will review how to configure Wired Guest Access. Now almost all clients support wireless, it seems that the “Wired Guest Access” function is useless. But in fact, “Life is full...
I have a Synology NAS, I often need to access it when I am traveling, and I don’t have a Static IP – Static IP that requires network provider support and requires additional expenses....
By default, the Syslog address of AP is displayed as below. If you set the Syslog server address and want to return to the initial state, you can use the following commands. The test...
If we need to automate the WLC GUI, I think the best automation application is Selenium. In this article I will try to describe in detail how to use Selenium to log into the...
Session Timeout: Force the client to re-authenticate when the timer expires. This is not related to the client’s traffic. User Idle Timeout: Remove the client after it has been inactive for more than the...
In this post we will see how to configure Central Web Authentication (CWA). The topology in this example is as follows. WLC configuration 1. Add RADIUS Authentication Server 2. Configuring WLAN 3. Configuring DNS...
Recent Comments